Upload your HP Tuners CSV datalog and get a professional AI-generated diagnostic report in minutes. Knock events, fuel trims, transmission health, torque management — all analyzed with your specific build in mind.
AI Recommendation #1
Increase base fuel enrichment 2–3% at 2500–3000 RPM to address knock concentration zone. Verify MAF calibration for lean LTFT.
TunerMind analyzes every critical channel in your HP Tuners datalog and delivers actionable insights tailored to your build.
Detect and map knock events by RPM and load zone. Get specific recommendations to eliminate detonation.
Analyze LTFT/STFT across both banks. Identify lean/rich conditions, MAF issues, and vacuum leaks.
Deep-dive into torque converter slip data. Evaluate lockup behavior and transmission health.
Quantify PCM torque reduction events and their impact on drivability and performance.
Every report is tailored to your specific build — cam, tires, gears, DOD status, and more.
Prioritized tuning recommendations with specific actions, not generic advice.
A stock 5.3L with AFM/DOD enabled, 285/70R17 tires, and a mild cam swap. The owner reported sluggish throttle response and occasional hesitation under load.
TunerMind identified 47 knock events concentrated at 2,500–3,000 RPM, a lean LTFT condition suggesting MAF drift, and TCC slip indicating the transmission tune hadn't been updated for the cam.
The 6L80 and 6L90 are notorious for TCC slip issues, especially on modified trucks and SUVs. TunerMind was built by enthusiasts who know these transmissions inside and out.
Drag and drop your HP Tuners datalog CSV file.
Enter your vehicle specs, mods, and tune details.
AI analyzes your data and generates a detailed diagnostic report in minutes.